|
 |
|
 |
|
Saddlebags and Matching Motorcycle Seats, The Leatherworks Saddle Bags and C&C Seats to Match |
|
|
(c) American Side Road Cycles
SmartCart(TM) eCommerce System |
|
C&C Motorcycle Seats for Harley Davidsons, Honda Fury and Honda VTX - Made in the USA -
|
|
Lots of
Options - Select from various Stitch Patterns, Leather, Vinyl,
Ostrich, Alligator, Stingray, Gel seats, etc... |
|
|
|
|
|
|
Saddlebags and Matching Motorcycle Seats, The Leatherworks Saddle Bags and C&C Seats to Match
There are many options to select from, below are just four examples |
 |
|
White Leather C&C Seat and matching White Leather Saddle Bags from The Leatherworks
|
|
 |
|
Tan Leather C&C Seat and matching Tan Leather Saddlebags from The Leatherworks
|
|
 |
|
Matching Tan Embossed Ostrich Leather Over-Lay C&C Seat and Leatherworks Saddle Bags
|
|
 |
|
Medium Brown Leather C&C Seat and matching Medium Brown Leather Saddlebags from The Leatherworks |
|
|
The Leatherworks
prides itself on the American Made quality workmanship that is put into every motorcycle saddlebag and tool bag. You'll also find great classic styling with a rare attention to detail. The Leatherworks offers more customizing choices for your motorcycle saddle bags than anyone in the business. All of The Leatherworks saddlebags can be made with a zipper detachable yoke or made bolt on ready for use with the Easy Brackets detachable system. All the roller buckles are backed by a Quick Release allowing the rider to access the inside of the bag in seconds. The Leatherworks, Inc., founded in 1976, makes handcrafted Saddlebags and Tool Bags with uncompromising care. All their leather saddlebags and motorcycle accessories are made from a 10-12oz American tanned struck through black leather. This is the heaviest leather being used in the industry. All saddle bags have ABS plastic reinforcement on the tops of the bags and all bolt on bags have hard backs made of conveyor belt rubber reinforced with ABS plastic. |
|
Order
Your Matching Leatherworks Saddlebags and C&C Seat Below |
|
|
C&C Motorcycle Seats start with quality hand laid fiberglass that contour to every angle of your frame, in order to build a strong, yet flexible foundation. C&C Seats then uses high-density urethane foam with a unique shape that buckets you in the seat. This highly resilient urethane foam provides firm resilient comfort, despite the ultra low profile, our unique foam cushions and supports your weight evenly for a comfortable ride, for you and your passenger. LEATHER - Leather is great for motorcycle seats, it adds to the comfort for long distance riding. Leather is a natural product; it breathes very well and helps to keep your body cool. Leather will also conform to the foam shape, and gives you a personalized fit with use. If you do a lot of cross country riding or commuting on your bike in bad weather, or park it outside, a water resistant Vinyl Seat Cover with minimal stitching is your best choice. If your bike is parked indoors and protected from the weather for much of its life, a leather seat covered with one of the standard stitch patterns offers added durability, riding comfort and increased pride of ownership. |
|
Order
Your Matching Leatherworks Saddlebags and C&C Seat Below |
|
|
|
Order Below, but first Read the following: |
-
CUSTOM SADDLEBAGS AND CUSTOM SEAT RETURN POLICY:The matching saddlebags and matching seats are made with custom materials and custom work, so they are non-refundable and non-exchangeable because they are difficult to re-sell.
-
THE LEATHERWORKS SADDLEBAGS WARRANTY:The Leatherworks products have a one year warranty against defects in material and workmanship.
-
C&C SEATS WARRANTY:All C&C Motorcycle Seats have a One Year Warranty against defects in material and workmanship.
- Shipping
Costs: Your Shipping
Price: $0.01 for all Leatherworks and C&C Seats products to be shipped
within the main contiguous USA only. Note that we only can ship C&C Seats to USA and Canada
-
VA deliveries subject to sales tax
- If Shopping
Cart Does Not Work: You may need to turn
off any personal fire wall protection programs. If you are still
having problems using our shopping cart system, please place
your order using our Secure On-line
Order Form.
- E-Mail and
Mailing List Privacy: American Side Road Cycles respects your privacy.
We'll use your e-mail address only when we are confirming your
Internet order, when we answer your questions or notifying you
of changes and updates to the site or other news. We assure you,
we do not make our email list or mailing list available to anyone
for any reason.
- COD Orders: At this time we can not accept COD orders
for Leatherworks or C&C Seats products.
- Be sure to read
our Legal Notice
|
|
|
|
If you
are purchasing bolt-on ready bags and are NOT purchasing the
Easy Bracket hardware system from us, please let us know, by
writing it in the Comments section of your order, what type of
saddlebag bolt-on system you intend to use (If you're purchasing
Easy Brackets from somewhere else, that's fine, just let us know).
Although this information is optional, if we know, then we can
make sure you have the right type of reinforcement and perhaps
help to intercept any problems. |
 |
Your Shipping
Price: $0.01 for Ground shipping for all Leatherworks and C&C Seat product orders to be shipped
within the main contiguous USA only. Note that we only can ship C&C Seats to USA and Canada. |
 |
|
Ordering a matching seat and saddlebags is a multi-step process Add one item or option at a time to your shopping cart. Once you add an item to your shopping cart, click on Continue Shopping to return and add more items. |
|
Lots of
Options - Select from various Colored Leather. 
|
|
Lots of
Options - Select from various Embossed Leathers 
|
|
Step
One, Order Saddlebags for your Bike, then hit the Continue
Shopping button and move onto Step Two for Bag Options Scroll
down the page to see various bags to select from, saddlebag options and Seats |
|
Plain Leatherworks
128 Wide Angle Leather Saddlebags Designed to follow angle of rear exterior shocks |
 |
|
Sold
as a set, one Bag for each side - Must use Easy Brackets and may require turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 110 Classic Saddlebags A large round bag, perfect for Large Cruiser Motorcycles Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - Must use Easy Brackets and may require turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 110X Classic Saddlebags An Extra large round bag, perfect for Large Cruiser Motorcycles with turn signals off the strut. Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - Must use Easy Brackets and may require turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 112 Saddlebags for Motorcycles with exterior shocks Designed to follow angle of rear exterior shocks. Select the exterior pockets and key locks in step Two below |
 |
|
Sold
as a set, one Bag for each side - Sportsters require turn signal relocation kit (sold separately) |
|
|
|
|
Large Plain Leatherworks 112X Saddlebags for Motorcycles with exterior shocks Designed to follow angle of rear exterior shocks. Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - May require Easy Brackets and turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 112+2 Inch Saddlebags for Motorcycles with exterior shocks Designed to follow angle of rear exterior shocks. Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - May require Easy Brackets and turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 125 Large Leather Motorcycle Saddlebags Works best on large bikes with the turn signals off the strut and on the rear of the fender. Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - May require Easy Brackets and turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 120 Extra Large Angle Saddlebags Works best on large bikes and is designed to follow angle of rear exterior shock. For the Softail Deluxe, you do NOT need to relocate the turn signals because the turn signals are on the fender and not on the strut. |
 |
|
Sold
as a set, one Bag for each side - May require Easy Brackets and turn signal relocation kit (both sold separately) |
|
|
|
|
Plain Leatherworks 315 Motorcycle Saddlebags Works best on bikes with high exhaust pipes Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - It can be made throw over zipper detachable or bolt on ready to use with the Easy Brackets |
|
|
|
|
Plain Leatherworks 312XLHD Left Side Motorcycle Solo Saddlebag If you have a Left side License Plate, you will need the 322L solo bag Select the Studs and Conchos in step Two below |
 |
|
Sold
as a set, one Bag for each side - It is 14” tall in the front, 9” tall in the back, 10.5" long across the top and 10” long across the bottom. |
|
|
|
|
|
|
Step
Two, Order Saddlebags Options - Select from below the additional "Build-A-Bag" Options that you want added to your bags Scroll down the page to see various bag options to select from and further down to select the Seat you want |
|
|
|
You must
Select the type of Saddlebags that you want = Bolt On Ready Bags or Zippered Yoke System
Bags |
|
|
|
OR |
|
|
|
If you selected BO Bolt On Ready Saddlebags above, please select Easy Brackets Bolt On Saddlebag Support Locking Hardware Systems |
 |
|
Sold
as a set, one Easy Bracket for each side. Your Shipping Price: $0.01 for UPS Ground shipping for all Easy Brackets orders to be shipped within the main contiguous USA only. The Easy Brackets System is a clean mount bolt-on system, has its own built-in locking mechanism (versus a padlock based system) and angles out less from the bike versus other brackets systems. (5 degrees versus 10 degrees). To remove, simply unlock and lift the saddlebags off. |
|
|
|
|
Select from
below the additional "Build-A-Bag" Options that you
want |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Colored
Spots and Colored Piping |
|
|
|
|
|
|
|
|
|
|
Black Softail, Sportster and Dyna Harley Davidson Turn Signal Relo Kits The kit does not include the outer license plate frame. |
 |
|
So you want to have a cool looking laid down license plate and relocate your turn signals so you can install those great detachable saddlebag brackets, Easy Brackets. Or maybe you just want to get those turn signals off the fender strut. Now you can do both with one easy kit. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. The kit uses the stock turn signals so you won’t lose the wing standoff. Easy to install, and on most late model bikes you don’t even have to cut the turn signal wires to relocate them. Installation usually takes less than one hour. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal.
|
|
|
|
|
Chrome Softail, Sportster and Dyna Harley Davidson Turn Signal Relo Kits The kit does not include the outer license plate frame. |
 |
|
So you want to have a cool looking laid down license plate and relocate your turn signals so you can install those great detachable saddlebag brackets, Easy Brackets. Or maybe you just want to get those turn signals off the fender strut. Now you can do both with one easy kit. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. The kit uses the stock turn signals so you won’t lose the wing standoff. Easy to install, and on most late model bikes you don’t even have to cut the turn signal wires to relocate them. Installation usually takes less than one hour. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal.
|
|
|
|
|
Softail and Dyna Harley Davidson Turn Signal Relo Kits The kit does not include the outer license plate frame. |
 |
|
So you want to have a cool looking laid down license plate and relocate your turn signals so you can install those great detachable saddlebag brackets, Easy Brackets. Or maybe you just want to get those turn signals off the fender strut. Now you can do both with one easy kit. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. The kit uses the stock turn signals so you won’t lose the wing standoff. Easy to install, and on most late model bikes you don’t even have to cut the turn signal wires to relocate them. Installation usually takes less than one hour. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal.
|
|
|
|
|
2010 & Later FXDWGI Dyna Wide Glide License Plate and Turn Signal Relocation Kit. |
 |
|
It’s lean and mean and makes a statement just like you do. Now you need the one product that will make your motorcycle complete. This product relocates the license plate and turn signals which allows you to install saddlebags on your motorcycle. The kit is used with or without Easy Brackets model DNA-L2. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal. How about this - the system is made from sturdy 12 guage steel and has a high luster black powder finish. It uses the existing turn signals and license plate light. and does not require any wires be cut to relocate them. The license plate light is cleverly tucked up under the fender.
|
|
|
|
|
|
|
Step
Three, Order C&C Motorcycle Seat that you want Scroll down the page to see various Seats to select from and Seat Options |
|
|
 |
Solo Seat - Logo Flap is on back only if you have a removable driver backrest to cover the hardware slot
|
|
The Embossed Leather is too thick to make a one piece LoPro Solo seat, it won't fold around the edges without puckers and won't lay smooth. If you want a Embossed Leather seat, you will need to order a two piece solo seat. |
|
|
|
|
|
 |
Solo Seat with Removable Drivers Backrest 8"x 12"
|
|
Order Solo Seat with Removable Drivers Backrest below |
|
|
|
|
|
|
Matching Road King, FLHX, Bagger Pillion
Seat for a Solo Seat -
The C&C Pillion Seats that mate with the solo seats, mount with a bracket in the rear that bolts to the fender like stock pillions, it also has six suction cups and a front tab that slides under the T-Bracket for the Solo Seat. |
 |
 |
 |
|
|
Matching Pillion
Seat for a Solo Seat -
The C&C Pillion Seats that mate with the solo seats, mount with a bracket in the rear that bolts to the fender like stock pillions, it also has six suction cups and a front tab that slides under the T-Bracket for the Solo Seat. |
 |
 |
|
|
| |
 |
Select Fastback Embossed
Leather 2 Up Seat
|
|
 |
Select Squareback Embossed
Leather 2 Up Seat
|
|
 |
Select Sport Tour Embossed
Leather 2 Up Seat
|
|
|
Select the Embossed Leather 2up seat that you want below. |
|
|
|
|
|
|
 |
Select Fastback Embossed
Leather 2 Up Seat with Removable Drivers Backrest 8"x 12"
|
|
 |
Select Squareback Embossed
Leather 2 Up Seat with Removable Drivers Backrest 8"x 12"
|
|
 |
Select Sport Tour Embossed
Leather 2 Up Seat with Removable Drivers Backrest 8"x 12"
|
|
|
Select the Embossed Leather 2up seat with Removable Drivers Backrest 8"x 12" that you want below. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Information about "Bolt-on
Ready" and "Throw-over" Saddlebags: |
|
For an even stronger saddlebag
with greater structural stability, the Leatherworks has
reinforced all bolt on ready bags with ABS plastic that is the full size of the back, not just strips. The plastic is about 0.25 inches thick. This is done for all bolt on bags and all larger throw over bags, including the 128 saddlebags. (if you order Easy Brackets from American Side Road Cycles, we’ll make sure
you get the proper support). |
|
The Leatherworks "Bolt-on Ready"
saddlebags
have specially reinforced
backs. Mounting hardware
(bolt-on brackets) is not provided. You may purchase this hardware
from your dealer, a trusted aftermarket supplier or from American
Side Road Cycles - the Leatherworks bags are designed to work
with just about any bolt-on system out there. We sell Easy Bracket
brand bolt-on hardware systems that you can purchase with the
bags or separately. The reinforcements are designed to work with
any bolt-on system that is currently on the market. Because the
Leatherworks saddlebags are designed to fit multiple motorcycle
makes and models, as well as just about any OEM and aftermarket
bolt-on system, it is not practical for them to pre-drill the
holes in the back of the saddlebags (can you say "Swiss
cheese"). You'll need to do this to properly fit these saddlebags
to the bolt-on system you select. The other reason is that everyone
has their own preferences as to how high/low or back/forward
they want to mount their bags. Because of these preferences and
the different systems, we've found it best to not pre-mount anything. With the use of lowering kits, the main thing is to be sure the bags clear the pipes and axle nuts, which with the Easy Brackets means putting the bracket lower on the back of the bike to get the clearance that is needed. |
|
The Leatherworks "Throw-over"
saddlebags
are designed with an adjustable
zippered yoke that connects the two sides of the saddlebag together.
On the zipper detachable bags, they have straps across the back which go between the bike and the bag on the support brackets. In other words, the support brackets slip between these straps to hold the bags in place.
This yoke is designed to go under the seat. We highly recommend
saddlebag supports for throw-over bags. These are fairly common
"U-brackets" that keep the bags from getting caught
in the shocks, gears, wheels and other parts of the bike. We
offer these "U-bracket" type supports from MC Enterprises.
The Leatherworks warrantees do not cover damage caused by the
lack of proper saddlebag supports. With the use of lowering kits, the main thing is to be sure the bags clear the pipes and axle nuts.
|
Zipper
to Zipper Yoke Measurements : |
|
Dyna Yoke
- For Dyna Series = 15 inches |
|
Standard Yoke
- For all others = 13 inches |
|
Sport Yoke
- For Sportsters 1994 & up and Dynas 2003 & up = 17 inches |
|
Honda Yoke
- For all Honda Bikes = 13 inches |
|
Adjustable
Yoke - For all Bikes = 11-1/2 to 17 inches |
|
Fatboy Yoke
- For all Fatboys with stock exhaust on 1999 and older bikes
= 10-1/2 inches |
|
|
|
|
 |
|
