|
 |
|
Harley Davidson Saddlebags, Triumph Saddle Bags, 128 Wide Angle Leather Saddle Bags from The Leatherworks |
|
|
(c) American Side Road Cycles
SmartCart(TM) eCommerce System |
|
 |
|
Hello: Just wanted to say how happy I am with the Leatherworks 128 bags and the Easy Brackets on my 2010 Triumph Thunderbird. Everything fit great and the quality is fantastic. - Colin C.
|
|
 |
|
128BOXP On a
2007 Harley Davidson Dyna Screaming Eagle |
|
|
128 Wide Angle Leather Saddle Bags from Leatherworks: The 128 Measures 12"H x16"L x7"D Designed to follow angle of rear exterior shock the long straps are standard. |
|
The
128 Saddle Bag Measures 12"H x16"L x7"D. Smooth lines, clean corners and great modern styling highlight the Leatherworks 128 Wide Angle Saddlebags that feature a contoured lid and welt trimmed edges. A rear pocket may be added for extra storage. They can be made zipper detachable with a yoke
or bolt on ready to work with the Easy Bracket or another direct
bolt on kit. On some motorcycles Turn Signals may need to be
relocated to the license plate with these applications (for proper
fit, turn signals must be off the strut).
The Leatherworks prides
itself on the American Made quality workmanship that is put into
every motorcycle saddlebag. You'll also find great classic styling
with a rare attention to detail. The Leatherworks, Inc., founded
in 1976, makes handcrafted Saddlebags with uncompromising care
from premium 10 ounce, American-tanned harness and Latigo leather. |
|
 |
|
All Leatherworks Saddlebags and Tool
Bags are designed to fit on stock motorcycles. We recommend that
you allow 1 inch to 1-1/2 inch clearance from the exhaust. All
Bags are warranted against defects in workmanship. The Leatherworks
cannot be held responsible for damage due to improper fit or
improper installation. |
|
Order
Your Leatherworks Saddlebags Below |
|
|
|
Order Your
American Made Leatherworks Saddlebags Below, but first Read the following: |
- Shipping
Costs: Your Shipping
Price: $0.01 for all Leatherworks product orders to be shipped
within the main contiguous USA only.
All order
within the Continental United States are shipped via FebEx ground.
3-day or 2-day shipping available for an additional charge.
-
VA deliveries subject to sales tax
- If Shopping
Cart Does Not Work: You may need to turn
off any personal fire wall protection programs. If you are still
having problems using our shopping cart system, please place
your order using our Secure On-line
Order Form.
- E-Mail and
Mailing List Privacy: American Side Road Cycles respects your privacy.
We'll use your e-mail address only when we are confirming your
Internet order, when we answer your questions or notifying you
of changes and updates to the site or other news. We assure you,
we do not make our email list or mailing list available to anyone
for any reason.
- COD Orders: At this time we can not accept COD orders
for Leatherworks products.
- Be sure to read
our Terms
of Business and Legal Notice
|
|
|
|
If you
are purchasing bolt-on ready bags and are NOT purchasing the
Easy Bracket hardware system from us, please let us know, by
writing it in the Comments section of your order, what type of
saddlebag bolt-on system you intend to use (If you're purchasing
Easy Brackets from somewhere else, that's fine, just let us know).
Although this information is optional, if we know, then we can
make sure you have the right type of reinforcement and perhaps
help to intercept any problems. |
|
Your Shipping
Price: $0.01 for FedEx Ground shipping for all Leatherworks product orders to be shipped
within the main contiguous USA only |
|
Step
One, Order bags for your Bike, then hit the Continue
Shopping button and move onto Step Two |
Step
Two, after step one, You Must Select bag type &
Order the "Build-A-Bag" Options that you want |
Step
Three, if
needed |
|
Leatherworks
Plain 128 Wide Angle Leather Saddle Bags: See More photos at the bottom of this page |
 |
|
(Sold
as a set, one Bag for each side - Saddlebag Bolt-on Hardware Systems and
Support Guards sold separately) |
|
|
Leatherworks
128 Wide Angle Leather Saddle Bags with "Build-A-Bag" Options (photo shows wider 120 Bag with Hand Laced Braiding and Basket Weave): |
 |
|
Every
Leatherworks Bag features handsome Indian Head Nickels, the Leatherworks
exclusive trademark & proof of authenticity |
|
|
|
|
|
You must
Select the type of Bags you want = Bolt On Ready Bags or Zippered Yoke System
Bags |
|
|
|
OR |
|
|
|
Select from
below the additional "Build-A-Bag" Options that you
want |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
. |
|
In
addition to Black Leather Bags we have these colors available: |
|
|
|
|
|
|
|
|
|
. |
|
|
Colored
Spots and Colored Piping |
|
|
|
|
|
|
|
|
|
|
|
|
 |
Your Shipping
Price: $0.01 for Ground shipping for all Leatherworks and C&C Seat product orders to be shipped
within the main contiguous USA only. Note that we only can ship C&C Seats to USA and Canada. |
 |
|
Black Softail, Sportster and Dyna Harley Davidson Turn Signal Relo Kits The kit does not include the outer license plate frame. |
 |
|
So you want to have a cool looking laid down license plate and relocate your turn signals so you can install those great detachable saddlebag brackets, Easy Brackets. Or maybe you just want to get those turn signals off the fender strut. Now you can do both with one easy kit. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. The kit uses the stock turn signals so you won�t lose the wing standoff. Easy to install, and on most late model bikes you don�t even have to cut the turn signal wires to relocate them. Installation usually takes less than one hour. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal.
|
|
|
|
|
Chrome Softail, Sportster and Dyna Harley Davidson Turn Signal Relo Kits The kit does not include the outer license plate frame. |
 |
|
So you want to have a cool looking laid down license plate and relocate your turn signals so you can install those great detachable saddlebag brackets, Easy Brackets. Or maybe you just want to get those turn signals off the fender strut. Now you can do both with one easy kit. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. The kit uses the stock turn signals so you won�t lose the wing standoff. Easy to install, and on most late model bikes you don�t even have to cut the turn signal wires to relocate them. Installation usually takes less than one hour. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal.
|
|
|
|
|
Softail and Dyna Harley Davidson Turn Signal Relo Kits The kit does not include the outer license plate frame. |
 |
|
So you want to have a cool looking laid down license plate and relocate your turn signals so you can install those great detachable saddlebag brackets, Easy Brackets. Or maybe you just want to get those turn signals off the fender strut. Now you can do both with one easy kit. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. The kit uses the stock turn signals so you won�t lose the wing standoff. Easy to install, and on most late model bikes you don�t even have to cut the turn signal wires to relocate them. Installation usually takes less than one hour. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal.
|
|
|
|
|
2010 & Later FXDWGI Dyna Wide Glide License Plate and Turn Signal Relocation Kit. |
 |
|
It�s lean and mean and makes a statement just like you do. Now you need the one product that will make your motorcycle complete. This product relocates the license plate and turn signals which allows you to install saddlebags on your motorcycle. The kit is used with or without Easy Brackets model DNA-L2. Your Shipping Price: $0.01 for Ground shipping for all Relo Kit orders to be shipped within the main contiguous USA only. Turn Signal / License Plate Relocation kits are designed to work with US license plates only. Plate size, 4" x 7 1/4" with 1/4" diameter holes, 2 3/4" CTC in the verticle and 5 3/4" CTC in the horizontal. How about this - the system is made from sturdy 12 guage steel and has a high luster black powder finish. It uses the existing turn signals and license plate light. and does not require any wires be cut to relocate them. The license plate light is cleverly tucked up under the fender.
|
|
|
|
|
WARRANTY: |
|
The Leatherworks
products have a one year warranty against defects in material
and workmanship. |
|
|
RETURNS: |
|
Custom Leatherworks
orders with colored materials or custom work are non-refundable
and non-exchangeable because they are difficult to re-sell. (custom
work includes Hand Laced Braiding, Fringe, Basket Weave, locks,
Carvings, etc.) For Standard Plain Black Leather products, we
offer a 14 day policy for you to evaluate your order. If you
have concerns about your order during this period, do not use
it, do not mount it or scratch it up, then contact The Leatherworks
to discuss your thoughts. If we are unable to resolve your concerns
or answer your questions, repack your order in the original box
and return it in new condition. The purchase price of the product,
less shipping charges, will be refunded minus a 15% re-stocking
fee. |
|
 |
|
128BOLK2 with
Overlay on a 2007 Triumph America |
|
 |
|
128BOBRC-2 on
a 2005 HD 883 |
|
|
|
|
128BOXP On a
2007 Dyna Screaming Eagle |
|
|
Information about "Bolt-on
Ready" and "Throw-over" Saddlebags: |
|
For an even stronger saddlebag
with greater structural stability, the Leatherworks has
reinforced all bolt on ready bags with ABS plastic that is the full size of the back, not just strips. The plastic is about 0.25 inches thick. This is done for all bolt on bags and all larger throw over bags, including the 128 saddlebags. (if you order Easy Brackets from American Side Road Cycles, we’ll make sure
you get the proper support). |
|
The Leatherworks "Bolt-on Ready"
saddlebags
have specially reinforced
backs. Mounting hardware
(bolt-on brackets) is not provided. You may purchase this hardware
from your dealer, a trusted aftermarket supplier or from American
Side Road Cycles - the Leatherworks bags are designed to work
with just about any bolt-on system out there. We sell Easy Bracket
brand bolt-on hardware systems that you can purchase with the
bags or separately. The reinforcements are designed to work with
any bolt-on system that is currently on the market. Because the
Leatherworks saddlebags are designed to fit multiple motorcycle
makes and models, as well as just about any OEM and aftermarket
bolt-on system, it is not practical for them to pre-drill the
holes in the back of the saddlebags (can you say "Swiss
cheese"). You'll need to do this to properly fit these saddlebags
to the bolt-on system you select. The other reason is that everyone
has their own preferences as to how high/low or back/forward
they want to mount their bags. Because of these preferences and
the different systems, we've found it best to not pre-mount anything. With the use of lowering kits, the main thing is to be sure the bags clear the pipes and axle nuts, which with the Easy Brackets means putting the bracket lower on the back of the bike to get the clearance that is needed. |
|
The Leatherworks "Throw-over"
saddlebags
are designed with an adjustable
zippered yoke that connects the two sides of the saddlebag together.
On the zipper detachable bags, they have straps across the back which go between the bike and the bag on the support brackets. In other words, the support brackets slip between these straps to hold the bags in place.
This yoke is designed to go under the seat. We highly recommend
saddlebag supports for throw-over bags. These are fairly common
"U-brackets" that keep the bags from getting caught
in the shocks, gears, wheels and other parts of the bike. We
offer these "U-bracket" type supports from MC Enterprises.
The Leatherworks warrantees do not cover damage caused by the
lack of proper saddlebag supports. With the use of lowering kits, the main thing is to be sure the bags clear the pipes and axle nuts.
|
Zipper
to Zipper Yoke Measurements : |
|
Dyna Yoke
- For Dyna Series = 15 inches |
|
Standard Yoke
- For all others = 13 inches |
|
Sport Yoke
- For Sportsters 1994 & up and Dynas 2003 & up = 17 inches |
|
Honda Yoke
- For all Honda Bikes = 13 inches |
|
Adjustable
Yoke - For all Bikes = 11-1/2 to 17 inches |
|
Fatboy Yoke
- For all Fatboys with stock exhaust on 1999 and older bikes
= 10-1/2 inches |
|
|
|
|
 |
|
